100326

机続き。今日は幕板と貫のホゾを切削。ノミの切れ味がいいと最後微調整する のも楽しい。残り4本。

SH4A続き。5.99.24のユーザランドを用意してNFSブートしてみようとしたところ....。これはまた厳しい。タイミングプロブレムだし。

=> go 0x89000000
## Starting application at 0x89000000 ...
load 8000000-8fff000
load 9000000-10000000
wired entry: 57-63
Loaded initial symtab at 0x891800fc, strtab at 0x891a1c30, # entries 8068
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.24 (RENESAS7785LCR) #22: Fri Mar 26 21:37:51 JST 2010
        uch@alexandrite:/usr/src.work2/sys.new2/arch/evbsh3/compile/RENESAS7785LCR
general exception handler:      324 byte
TLB miss exception handler:     272 byte
interrupt exception handler:    288 byte
total memory = 127 MB
avail memory = 119 MB
Renesas evaluation board R0P7785LC0011RL
mainbus0 (root)
cpu0 at mainbus0: SH4A 599.999 MHz PCLOCK 49.999 MHz
cpu0: 32KB/32B 4-way set-associative Instruction cache.
cpu0: 32KB/32B 4-way set-associative Data cache.
cpu0: U0, P0, P3 write-back; P1 write-back
cpu0: full-associative 4 ITLB, 64 UTLB entries
cpu0: multiple virtual storage mode, SQ access: kernel, wired 7
cpu0: 29bit physical address mode. TLB-compatible mode.
shb0 at mainbus0
scif0 at shb0
scif0: console
shpcic0 at mainbus0
pci0 at shpcic0
re0 at pci0 dev 0 function 0: RealTek 8169/8110 Gigabit Ethernet (rev. 0x10)
re0: interrupting at irq 0
re0: Ethernet address 00:00:87:6b:bd:6b
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
satalink0 at pci0 dev 1 function 0: Silicon Image SATALink 3512 (rev. 0x01)
satalink0: using irq 1 for native-PCI interrupt
atabus0 at satalink0 channel 0
atabus1 at satalink0 channel 1
satalink0: port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <Hitachi HDP725050GLA360>
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
root on md0a dumps on md0b
mountroot: trying nfs...
mountroot: trying ffs...
Supported file systems: nfs ffs
no file system for md0 (dev 0x600)
cannot mount root, error = 79
root device (default md0a): re0
dump device: 
file system (default generic): nfs
root on re0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.33.2
nfs_boot: my_name=athena
nfs_boot: my_domain=s.vnop.net
nfs_boot: my_addr=192.168.33.12
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.33.1
root on 192.168.33.2:/usr/work/nfsroot/sh7785
root time: 0x4bacab90
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init path (default /sbin/init): 
init: copying out path `/sbin/init' 11
Fri Mar 26 12:41:53 UTC 2010
Not checking /: nfs mounted
Starting file system checks:
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Building databases: dev, utmp, utmpx, servicesservices_mkdb: Error opening temporary database `/var/db/services.db.tmp': File exists
 done
Starting syslogd.
Unable to initialize OpenSSL PRNG: No such file or directory
Mounting all filesystems...
Clearing temporary files.
Mutex error: mutex_vector_enter: locking against myself

lock address : 0x000000008ffd5fcc
current cpu  :                  0
current lwp  : 0x000000008fc27bc0
owner field  : 0x000000000080e000 wait/spin:                0/1

panic: lock error
cpu0: Begin traceback...
calling through null pointer?
cpu0: End traceback...


U-Boot 2008.10-rc2-00002-g87b4ef5-dirty (Sep 18 2008 - 15:01:39)

CPU: SH4
BOARD: Renesas Technology Corp. R0P7785LC0011RL
DRAM:  128MB
FLASH: 64MB
*** Warning - bad CRC, using default environment

PCI: SH7780 PCI host bridge found.
PCI:   Bus Dev VenId DevId Class Int
        00  00  10ec  8169  0200  00
        00  01  1095  3512  0180  00
In:    serial
Out:   serial
Err:   serial
Net:   RTL8169#0
=>