090503

ジャガイモ。点検に廻っているとテントウムシダマシが各所に。指ではじいて おきました。

つぼみが見えてきた?

フォーク組みたて。ガイドブッシュ、スライドブッシュ、オイルシールを新品にして組みました。うっかりボケっとしてガイドブッシュを先にアウターにセットしてしまって、ガイドブッシュ一個無駄にした...。
オイルはいつも通りWAKO'S #10 油面100mmで。
車体に組みつけて確認してみても、特に問題はなさそう。

排気音が凄まじいので、グラスウール交換。特に飛び散ってはいないけれど、オイルまみれだからか。それともこんな音量だったのかな。
あらかじめ買っておいたグラスウール筒がサイズ合わなかった...。シートで買っておけばよかった。

新ノートパソコンに工人社のSA5ST08AをNTT-Xから買いました。26800円。
NetBSDはpckbcをacpiにアタッチしないでisaにアタッチするようにしないと キーボードが使えなかった。

#pckbc*  	at acpi?		# PC keyboard controller
pckbc0		at isa?			# pc keyboard controller

Xは、うまくいってない。

(II) NSC: Nsc family driver (version 2.8.1) for chipsets: 5530, SC1200,
	SC1400, REDCLOUD
(II) Primary Device is: PCI 00:01:1
(EE) No devices detected.

dmesg.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.72 (SICKLEMOON) #5: Sun May  3 21:59:06 JST 2009
	uch@alexandrite:/usr/work/src-4.99.72/sys/arch/i386/compile/SICKLEMOON
total memory = 503 MB
avail memory = 483 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
KOHJINSHA Co.,Ltd SA Series (Rev 1.00)
mainbus0 (root)
cpu0 at mainbus0: AMD 586-class, 498MHz, id 0x5a2
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <AMD   ,RSDT_000,31303030>, AslId <AMD ,31303030>
LNKA: ACPI: Found matching pin for 0.1.INTA at func 1: 11
LNKB: ACPI: Found matching pin for 0.15.INTB at func 3: 5
LNKD: ACPI: Found matching pin for 0.15.INTD at func 4: 10
LNKC: ACPI: Found matching pin for 0.12.INTA at func 0: 3
LNKB: ACPI: Found matching pin for 0.13.INTA at func 0: 5
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 32-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpiacad0 at acpi0 (ADP0, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: None, Lion, NBP3A61 00CC
attimer0 at acpi0 (TMR, PNP0100): AT Timer
attimer0: io 0x40-0x43,0x48-0x4b irq 0
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at acpi0 (COPR, PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: reported by CPUID; using exception 16
PS2K (PNP0303) at acpi0 not configured
PS2M (SYN1910) at acpi0 not configured
acpitz0 at acpi0 (TZ00): critical 83.0C hot 81.0C passive 59.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer0: attached to pcppi0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 1 function 0
pchb0: vendor 0x1022 product 0x2080 (rev. 0x33)
vga0 at pci0 dev 1 function 1: vendor 0x1022 product 0x2081 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
glxsb0 at pci0 dev 1 function 2: RNG AES
cbb0 at pci0 dev 12 function 0: vendor 0x104c product 0x8039 (rev. 0x00)
vendor 0x104c product 0x803b (miscellaneous mass storage) at pci0 dev 12 function 2 not configured
vendor 0x104c product 0x803c (SD Host Controller system) at pci0 dev 12 function 3 not configured
rtk0 at pci0 dev 13 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 5
rtk0: Ethernet address 00:1e:33:18:3b:82
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gcscpcib0 at pci0 dev 15 function 0
gcscpcib0: vendor 0x1022 product 0x2090 (rev. 0x03)
timecounter: Timecounter "gcscpcib0" frequency 3579545 Hz quality 1000
gcscpcib0: can't alloc an MFGPT for WDT
, GPIO
gpio0 at gcscpcib0: 32 pins
viaide0 at pci0 dev 15 function 2
viaide0: Advanced Micro Devices CS5536 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel ignored (disabled)
vendor 0x1022 product 0x2093 (audio multimedia, revision 0x01) at pci0 dev 15 function 3 not configured
ohci0 at pci0 dev 15 function 4: vendor 0x1022 product 0x2094 (rev. 0x02)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
gcscehci0 at pci0 dev 15 function 5: vendor 0x1022 product 0x2095 (rev. 0x02)
gcscehci0: interrupting at irq 10
gcscehci0: EHCI version 1.0
gcscehci0: companion controller, 4 ports each: ohci0
usb1 at gcscehci0: USB revision 2.0
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x821000
cbb0: interrupting at irq 3
cardslot0 at cbb0
cardbus0 at cardslot0: bus 1
pcmcia0 at cardslot0
isa0 at gcscpcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 6.3
pms0: Palm detect
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 0x1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
acpiacad0: AC adapter online.
uhub2 at uhub1 port 4: vendor 0x0424 product 0x2503, class 9/0, rev 2.00/0.01, addr 2
uhub2: multiple transaction translators
uhub2: 2 ports with 1 removable, self powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: DIALOGUE INC PenMount USB, rev 1.00/a4.b4, addr 3, iclass 3/1
ums0 at uhidev0
ums0: X report 0x0002 not supported
wd0 at atabus0 drive 0: <Hitachi HTS541680J9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
rum0 at uhub2 port 2
rum0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 4
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:0d:f0:5a:7c:f3
rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: rtk0
root on rtk0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.33.2
nfs_boot: my_name=sicklemoon
nfs_boot: my_domain=s.vnop.net
nfs_boot: my_addr=192.168.33.25
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.33.1
root on 192.168.33.2:/usr/work/nfsroot/i386
root file system type: nfs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)